HD/SD/Analog/PC Mixed High Resolution Multi Viewer (Max. 32-Split, 4 Outputs)

Video Formats

3G: 1080/60p, 1080/59.94p, 1080/50p (LEVEL A)

HD: 1080/60i, 1080/59.94i, 1080/50i, 720/60p, 720/59.94p, 720/50p, 1080/30p, 1080/29.97p, 1080/25p, 1080/24p, 1080/23.98p, 720/24p, 720/23.98p, 1080/30PsF, 1080/29.97PsF, 1080/25PsF, 1080/24PsF, 1080/23.98PsF, 1035/60i, 1035/59.94i

SD: 525/60 (NTSC), 625/50 (PAL)

Video Inputs

Accepts the following signals (Mix input, asynchronous acceptable):

HD-SDI/SD-SDI Input Card
(MV-32HSDI)

3G-SDI: 2.97 Gbps or 2.97/1.001 Gbps, 75Ω BNC
HD-SDI: 1.485 Gbps or 1.485/1.001 Gbps, 75Ω BNC
SD-SDI: 270 Mbps, 75Ω BNC
Quantization: Y: 10-bit, C: 10-bit
Number of inputs: 8 inputs per MV-32HSDI card

Analog Composite Input Card
(MV-32AI)

Analog Composite: 1.0 Vp-p, 75Ω BNC
Quantization: Y: 10-bit, C: 10-bit
Number of inputs: 8 inputs per MV-32AI card

Analog Composite Input Card
(MV-32AIL)

Analog composite: 1.0 Vp-p loop-through or 75Ω termination (manually selectable) BNC
Quantization: Y: 10-bit, C: 10-bit
Number of inputs: 4 inputs per MV-32AIL card

DVI (Digital and Analog RGB) Input Card
(MV-32PCI)

Analog RGB

·  DVI-I connectors

·  Quantization: R: 8-bit, G: 8-bit, B: 8-bit

·  Input resolution: PC (VESA DMT) 640x480, 1024x768, 1280x1024, 1360x768, 1600x1200, 1920x1200, 1440x900, 1680x1050 * 1920x1200 is supported only for Reduced Blanking VIDEO (SMPTE), 1920x1080p, 1280x720p

·  Refresh rate: 60 Hz, R/G/B: 0.7 Vp-p, H/V: TTL * Support progressive video only.

DVI

·  DVI-I connectors

·  Quantization: R: 8-bit, G: 8-bit, B: 8-bit

·  Input resolution: PC (VESA DMT) 640x480, 1024x768, 1280x1024, 1360x768, 1600x1200, 1920x1200, 1440x900, 1680x1050 * 1920x1200 is supported only for Reduced Blanking VIDEO (SMPTE), 1920x1080p, 1280x720p

·  Refresh rate: 60Hz, HDCP not supported * Support progressive video only.
* Plug-and-play devices such as computers that are connected to the DVI output connectors are recognized as DVI-D compatible monitors.

·  Number of inputs: 3 inputs per MV-32PCI card

Audio Input

HD-SDI/SD-SDI Input Card (MV-32HSDI)

·  Embedded audio signal

·  Sampling frequency: 48 kHz (sync to input video signals)

·  Quantization: 16 to 24-bit

·  16 channels per 3G/HD/SD-SDI input signal (4 groups, 8-stereo pairs)

·  Number of inputs: 128 channels per MV-32HSDI card

Analog Audio Input Card (MV-32AAI)

·  Analog Audio signal,Balanced or unbalanced, 25-pin D-sub (female) x 2 (inch screw) * The circuit between COLD and SHIELD pins must be shorted outside the unit for an unbalanced input.

·  Input impedance: 600Ω or Hi-Z

·  Input level: -10 dBV/-3 dBu/0 dBu/+4 dBu

·  Maximum input level (with +4 dBu input level): +24 dBu (balanced), +18 dBu (unbalanced)

·  Rated input power (with 600Ω termination): +24 dBm

·  Sampling frequency: 48 kHz, Quantization: 24-bit

·  Number of inputs: 16 channels per MV-32AAI card (8-stereo pairs)

AES Audio Input Card (MV-32DAI)

·  AES Audio signal, Unbalanced, 75Ω BNC x 8

·  Sampling frequency: 32/44.1/48 kHz

·  Quantization: 16 to 24-bit

·  Number of inputs: 16 channels per MV-32DAI card (8-stereo pairs)

LTC Input

1 input, SMPTE time code 1.0 Vp-p within ±6 dB

Video Outputs

DVI: (Outputs digital and analog outputs at the same time), DVI-I connector x 2

·  Quantization: R: 8-bit, G: 8-bit, B: 8-bit

·  Resolution: 1920x1200, 1600x1200, 1280x1024, 1360x768, 1440x900, 1680x1050, 1920x1080, 1280x720

·  Refresh Rate: 60 Hz, 59.94 Hz, 50 Hz *No input/output frame rate converter. A frame rate difference between input and output may result in a repeat frame or drop frame.

SDI output
(when an MV-32HDO option is installed)

·  75Ω BNC x 2, Output modes of DVI Layout and Routing Switcher are selectable for each output separately.

·  Quantization: Y: 10-bit, C: 10-bit (Normal), Y: 8-bit, C: 8-bit (MV-32RT vertical rotation) DVI Layout mode:

·  3G-SDI: 2.97Gbps or 2.97/1.001Gbps, 1080/59.94p, 1080/50p (Level A)

·  HD-SDI: 1.485 Gbps or 1.485/1.001 Gbps, 1080/59.94i, 1080/50i, 720/59.94p, 720/50p * Blue matte background for other than 1080p or 720p.
Routing Switcher mode:

·  SD (270 Mbps), HD (1.485 Gbps or 1.485/1.001 Gbps), 3G (2.97 Gbps or 2.97/1.001 Gbps) * The same as inputs.
* Inputs in the MV-32PCI are recognized as 3G signals (1920x1080/59.94p Level A). 1920x1200 input signals will be resized to 1920x1080. Signals of other resolutions will be displayed in the original size at the center of 1920x1080.
* In the Routing Switcher mode, input signal changes cause switching noises. Signal switching using switching point is not supported.

Audio Output

Analog Audio:

·  RCA pin jack x 2 (1 stereo pair, or 2 mono channels), unbalanced

·  Output impedance: 100Ω or below, Output level: -10 dBV

·  Maximum output level: +5 dBV, Sampling frequency: 48 kHz

·  Quantization: 24-bit

Embedded Audio (when an MV-32HDO option is installed):

·  Group x 4 (8 stereo pairs)

·  Sampling frequency: 48 kHz

·  Quantization: 24-bit

Genlock Input

BB: NTSC 0.429 Vp-p/PAL 0.45 Vp-p, Tri: 0.6 Vp-p

I/O Delay

1 to 1.5 frames (with an interlaced SDI video input)

Video Window

Up to 32 windows per output card.
* Up to 32 total windows for 2 outputs.
*Full: 5/32, 1/4: 15/32, 1/16: 12/32 (Output resolution: Max. Window No.)

Clock Window

Up to 4 windows per output card.
* Up to 4 total windows for 2 outputs.
Internal clock or LTC time code selectable
* Accuracy within ±10 seconds per month (at 25ºC)

Count up/down timer and remaining time counter display

Displayed in clock window. (Internal clock or LTC is selectable for remaining time counter.)
Count up/down timer uses an internal crystal oscillator: Temperature characteristic within ±50PPM (0ºC to 40ºC)

Background Display

1 image per output can be saved and displayed. Max. image size: 1920x1200

Logo Display

2 Images per output can be saved and displayed. Max. image size: 480x480

Screen Layout

User customized layout, Up to 32 layout patterns can be saved.

Title Display

Character limit: Max.16 characters x 2 lines for each input channel
Character types: Alphanumeric characters and symbols

Tally Indication

Square indicator (red or green) or frame (red, green) for each input

Audio Level Metering

Up to 16 audio channels of embedded audios per input
(MV-32AAI and MV-32DAI options for other audio level metering support.)

Time Code Display

Time code reader display for embedded 3G (Level A)/
HD/SD-SDI ancillary time code (ATC)
* Ancillary Time Codes (ATC) are not passed through.
* Time code input in LTC connector is not displayed.

Video Timer Display

The clock display window can be used as a count-up can be displayed or count-down timer.

Time Code Display

Ancillary time code (ATC) embedded on 3G/HD/SD-SDI

Video Monitoring

Video loss, Freeze*, Illegal luminance level detection
* When calculated active picture CRC values are equal.

Audio Monitoring

Audio loss, Silence, Over level detection

Interfaces

RS-232C/RS-422/RS-485:

·  9-pin D-sub (male) x 1

·  Baud rate: 9,600/19,200/38,400/57,600/115,200 bps, data length 8-bit, stop bit 1-bit, parity NONE/ODD/EVEN

GPIO:

·  50-pin D-sub (female), 6/50 pins are input/output compatible.

·  Up to 48 inputs (up to 96 inputs with 2 output card options) Input: Layout patterns 1 - 32

·  Input switching of CHs 1 - 32 for windows 1 - 4

·  Audio switching of CHs 1 - 32 for audio monitors 1 and 2

·  Red/green tally inputs CHs 1 - 32* (TTL negative logic level signal or Make contact)*

·  Time correction input, Alarm reset input, Count up/down timer start/stop/reset

·  Video source switching for SDI OUT 1 and 2 (TTL negative logic pulse signal or make contact) except* Output: Open collector, negative logic max. load: 24 V DC 40 mA (equivalent to 74LS06)
Alarm output: FAN, video signal loss, video freeze, luminance level, black level, audio over level, audio silence level, audio loss Status output: Power units 1 and 2, GENLOCK, Timers> Time correction output

LAN:

·  100BASE-TX/1000BASE-T, RJ-45 (Category 5) x 1

Layout Editor

Edit size and position of windows in multi-channel screen (Windows software)

Remote Control Software

Switch multi-channel screen layouts (Windows software)

Live Viewer

Software for video transmission (Windows software)

Logo Registry Software

Registers background image and logo data (Windows software)

Data Backup

Stores the setting data to the memory (Rewrite capacity: approx. one hundred thousand times)
* Frequent changes of display settings may result in being unable to retain data.

Temperature / Humidity

0ºC to 40ºC / 30% to 90% (no condensation)

Backup battery

Internal lithium battery (to maintain time)

Power

100 V AC to 240 V AC ±10%, 50/60 Hz

Power Consumption

Max. 333 VA (326 W) (at 100 V AC), Max. 328 VA (314 W) (at 200 V AC)

Dimensions / Weight

430 (W) x 88 (H) x 510 (D) mm, EIA 2 RU /
14.5kg (MV-3200MF x 1, MV-32HSDI x 4 , MV-32PCDO x 2 , MV-32PS x 1)

Accessories

Operation manual, AC cord, Rack mount brackets, CD-ROM (Layout Editor, Remote Control Software, Live Viewer, Logo Registry Software)

Options

·  MV-32PS: Redundant power supply unit

·  MV-32FP: Front control panel

·  MV-32RT: 90º rotation display

·  MV-32SNMP: SNMP support

·  MV-32HDO: HD-SDI output (SD-SDI is not supported)